Empire Refractory Specialists   

Empire Refractory Specialists


  • ALAMO 9" x 4 1/2" x 2 1/2" ST -- -- An economical, dry-pressed, super-duty fireclay brick. It is intended for general service conditions.
    Buy Now


  • CERAMIC FIBER PAPER 1/4" x 24" x 62.5' (125 S.F. per carton) -- -- Ceramic Fiber Paper is a lightweight, refractory material processed from alumina-silica ceramic fibers formed in a flexible sheet. It is recommended for . . .
    Buy Now


  • CERAMIC FIBER PAPER 1/8" x 24" x 125' (250 S.F. per carton) -- -- Ceramic Fiber Paper is a lightweight, refractory material processed from alumina-silica ceramic fibers formed in a flexible sheet. It is recommended for . . .
    Buy Now


  • CLIPPER D.P. 13" x 4 1/2" x 3" ST -- -- A dry pressed super-duty brick with good strength, low shrinkage, and good resistance to thermal shock. Typical applications included air heaters, combustion . . .
    Buy Now


  • CLIPPER D.P. 9" x 4 1/2" x 1 1/4" #1 SPLIT -- -- A dry pressed super-duty brick with good strength, low shrinkage, and good resistance to thermal shock. Typical applications included air heaters, combustion . . .
    Buy Now


  • CLIPPER D.P. 9" x 4 1/2" x 2 1/2" #1 ARCH -- -- A dry pressed super-duty brick with good strength, low shrinkage, and good resistance to thermal shock. Typical applications included air heaters, combustion . . .
    Buy Now


  • CLIPPER D.P. 9" x 4 1/2" x 2 1/2" #2 ARCH -- -- A dry pressed super-duty brick with good strength, low shrinkage, and good resistance to thermal shock. Typical applications included air heaters, combustion . . .
    Buy Now


  • CLIPPER D.P. 9" x 4 1/2" x 2 1/2" ST -- -- A dry pressed super-duty brick with good strength, low shrinkage, and good resistance to thermal shock. Typical applications included air heaters, combustion . . .
    Buy Now


  • CLIPPER D.P. 9" x 4 1/2" x 3 ST -- -- A dry pressed super-duty brick with good strength, low shrinkage, and good resistance to thermal shock. Typical applications included air heaters, combustion . . .
    Buy Now


  • DV-38 -- -- DV-38 is an extra high strength, low apparent porosity, high alumina, burned phosphate-bonded brick featuring excellent alkali resistance. Withstands . . .
    Buy Now


  • EXPRESS 30 PLUS -- -- A 3000F (1647C), dense free flowing refractory castable. It can either be cast or pumped. Its density together with very good abrasion resistance makes . . .
    Buy Now


  • GREENCAST 97 -- -- A HIGH STRENGTH, HIGH PURITY CALCIUM ALUMINATE BONDED 97% ALUMINA CASTABLE WITH EXTREMELY HIGH REFRACTORINESS USED IN CONDITIONS REQUIRING RESISTANCE TO . . .
    Buy Now


  • GREENCAST-94 PLUS -- -- A HIGH STRENGTH, HIGH PURITY CALCIUM ALUMINATE BONDED 94% ALUMINA CASTABLE WITH EXTREMELY HIGH REFRACTORINESS. USED IN CONDITIONS REQUIRING HIGH ABRASION . . .
    Buy Now


  • GREENKLEEN 60 PLUS -- -- Is a 60% alumina, low cement castable containing andalusite. GREENKLEEN 60 PLUS displays outstanding abrasion resistance, thermal shock resistance, and . . .
    Buy Now


  • GREENLITE 45-L AL -- -- This lightweight castable has a very high strength to weight ratio. It is ideally suited for insulating Aluminum sub-hearths and crucibles.
    Buy Now


  • GREENPAK 85-MP PLUS -- -- This is an economical version of GREENPAK 85-P PLUS. It is phosphate-bonded and shows improved strength at intermediate operating temperature.
    Buy Now


  • GREENSET 94-P -- -- A wet, phosphate bonded, high alumina mortar, with smooth working characteristics, and good resistance to slag attack.
    Buy Now


  • INSBOARD 2300 1" x 24" x 36" -- -- INSBOARD is a vacuum formed ceramic fiber board with excellent insulating characteristics, as well as thermal stability. It can be used as a hot face . . .
    Buy Now


  • INSBOARD 2300 HD 1" x 24" x 36" -- -- INSBOARD is a high density, vacuum formed ceramic fiber board with excellent insulating characteristics and increased mechanical strength. It is often . . .
    Buy Now


  • INSWOOL BULK 25# CARTON -- -- INSWOOL HP BULK is a low iron, high purity alumina-silica bulk ceramic fiber which can be used at temperatures to 2400F. INSWOOL HP BULK demonstrates . . .
    Buy Now


  • INSWOOL HP BLANKET 6# 1" x 24" x 25' -- -- INSWOOL HP BLANKET is a low iron, high purity ceramic fiber blanket developed especially for use in highly reducing atmospheres. It is lightweight, flexible . . .
    Buy Now


  • INSWOOL HP BLANKET 8# 1" x 24" x 25' -- -- INSWOOL HP BLANKET is a low iron, high purity ceramic fiber blanket developed especially for use in highly reducing atmospheres. It is lightweight, flexible . . .
    Buy Now


  • INSWOOL HP BLANKET 8# 2" x 24" x 25' -- -- INSWOOL HP BLANKET is a low iron, high purity ceramic fiber blanket developed especially for use in highly reducing atmospheres. It is lightweight, flexible . . .
    Buy Now


  • INSWOOL HTZ BLANKET 8# 1" x 24" x 25' -- -- INSWOOL HTZ BLANKET is a 2700F related alumina-silica-zirconia ceramic fiber blanket. It displays very low thermal conductivity, excellent thermal shock . . .
    Buy Now


  • INSWOOL HTZ BLANKET 8# 1/2" x 24" x 25' -- -- INSWOOL HTZ BLANKET is a 2700F related alumina-silica-zirconia ceramic fiber blanket. It displays very low thermal conductivity, excellent thermal shock . . .
    Buy Now


  • KAST-O-LITE 19L PLUS -- -- A 1900F (1037C) maximum service temperature insulating castable. It exhibits greater crushing strengths than traditional mineral wool block insulation . . .
    Buy Now


  • KAST-O-LITE 22 PLUS -- -- A lightweight castable for temperatures to 2200F (1205C). It features low thermal conductivity and good strength for such a lightweight material.
    Buy Now


  • KAST-O-LITE 30 LI -- -- A lightweight insulating castable with high purity cement and a maximum service temperature of 3000F (1649C).
    Buy Now


  • KRUZITE GR PLUS -- -- KRUZITE GR PLUS is a 70% alumina, dense, 3200F (1760C) maximum service temperature gunning castable. It exhibits excellent strengths and high densities. . . .
    Buy Now


  • KS-4 PLUS -- -- A dense, strong general purpose castable refractory for use at temperatures up to 2550F. It combines high strength with abrasion resistance.
    Buy Now


  • KS-4V PLUS -- -- A general purpose castable for use to temperatures to 2600F. KS-4V features good resistance to abrasion, a low iron content, and minimal shrinkage, even . . .
    Buy Now


  • KX-99 BF 13 1/2" x 4 1/2" x 3" ST -- -- A high fired dry pressed, coarse grain, super-duty brick with low porosity, high strength, good alkali resistance, and good resistance to carbon monoxide . . .
    Buy Now


  • KX-99 BF 9" x 4 1/2" x 3" ST -- -- A high fired dry pressed, coarse grain, super-duty brick with low porosity, high strength, good alkali resistance, and good resistance to carbon monoxide . . .
    Buy Now


  • LO-ABRADE PLUS -- -- A 2600F castable with excellent resistance to abrasion and erosion. Its low iron content makes it particularly good for use in specialized atmosphere . . .
    Buy Now


  • MC-25 PLUS -- -- A high strength, coarse aggregate castable for temperatures to 2250F. MC-25 possesses two-to-three times the strength of regular dense castables, has . . .
    Buy Now


  • MINERAL WOOL BLOCK INSULATION 1 1/2" x 12" x 36" (30 S.F. /carton) -- -- MINERAL WOOL BLOCK INSULATION is a 1900F maximum service temperature lightweight mineral wool block insulation. MINERAL WOOL BLOCK INSULATION exhibits . . .
    Buy Now


  • MINERAL WOOL BLOCK INSULATION 1" x 12" x 36" (48 S.F. / carton) -- -- MINERAL WOOL BLOCK INSULATION is a 1900F maximum service temperature lightweight mineral wool block insulation. MINERAL WOOL BLOCK INSULATION exhibits . . .
    Buy Now


  • MINERAL WOOL BLOCK INSULATION 2" x 12" x 36" (24 S.F. /carton) -- -- MINERAL WOOL BLOCK INSULATION is a 1900F maximum service temperature lightweight mineral wool block insulation. MINERAL WOOL BLOCK INSULATION exhibits . . .
    Buy Now


  • MINERAL WOOL BLOCK INSULATION 3" x 12" x 36" (15 S.F. /carton) -- -- MINERAL WOOL BLOCK INSULATION is a 1900F maximum service temperature lightweight mineral wool block insulation. MINERAL WOOL BLOCK INSULATION exhibits . . .
    Buy Now


  • MIZZOU CASTABLE PLUS -- -- A high strength 60% alumina castable, with excellent resistance to slag penetration and spalling. It is used for many applications such as combustion . . .
    Buy Now


  • MIZZOU GR PLUS -- -- 60% alumina gunning castable. MIZZOU GR PLUS is a 3000F (1650C) gunning refractory with low iron content, good slag resistance, and excellent volume . . .
    Buy Now


  • NO. 36 REFRACTORY CEMENT -- -- No. 36 REFRACTORY CEMENT is a wet, air-setting, high temperature cement with good bonding strength and refractoriness. It can be used for all types of . . .
    Buy Now


  • SAIRSET -- -- A wet, high strength, air-setting, high temperature mortar. This mortar is formulated for trowelled joint, but can be thinned for dipping by adding water. . . .
    Buy Now


  • SUPER HYBOND PLUS -- -- An air-setting, super-duty fireclay plastic. Its special bonding system provides additional strength at lower temperatures. It has excellent adhesion . . .
    Buy Now


  • VERSAFLOW 60 PLUS -- -- A 60% alumina low cement castable based on bauxite calcines, which has versatile installation capability - from vib-casting to pump casting. This product . . .
    Buy Now


  • VS - 100 304 ALLOY (10" LONG) -- -- 304 alloy and 310 alloy V-type anchors with foot 5/16" diameter.
    Buy Now


  • VS - 20 304 ALLOY (2" LONG) -- -- 304 alloy and 310 alloy V-type anchors with foot 5/16" diameter.
    Buy Now


  • VS - 25 304 ALLOY (2 1/2" LONG) -- -- 304 alloy and 310 alloy V-type anchors with foot 5/16" diameter.
    Buy Now


  • VS - 30 304 ALLOY (3" LONG) -- -- 304 alloy and 310 alloy V-type anchors with foot 5/16" diameter.
    Buy Now


    -- 304 alloy and 310 alloy V-type anchors with foot 5/16" diameter.
    Buy Now


  • VS - 50 304 ALLOY (5" LONG) -- -- 304 alloy and 310 alloy V-type anchors with foot 5/16" diameter.
    Buy Now


  • VS - 60 304 ALLOY (6" LONG) -- -- 304 alloy and 310 alloy V-type anchors with foot 5/16" diameter.
    Buy Now


  • VS - 70 304 ALLOY (7" LONG) -- -- 304 alloy and 310 alloy V-type anchors with foot 5/16" diameter.
    Buy Now


  • VS - 80 304 ALLOY (8" LONG) -- -- 304 alloy and 310 alloy V-type anchors with foot 5/16" diameter.
    Buy Now


  • VS - 90 304 ALLOY (9" LONG) -- -- 304 alloy and 310 alloy V-type anchors with foot 5/16" diameter.
    Buy Now







    Empire Refractory Specialists
    eCommerce Solution by Nexternal Solutions
  •